Flash Extractor
Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
NAND Reader


NAND_Reader.exe - is program that works with NAND flash memory

Controls


Choose work folder where dumps will be stored


Choose chip


Use arrows or double click to choose chip number


Select all banks


Read chip ID


Read memory


Configuration menu


Extra functions


It is possible that one chip have several memory dies (banks) inside
You can select which will be in work


Chip select

Double click to select chip


Filter by name


Filter by ID


Auto find chip


Reading
1. Choose work folder where dumps will be stored
2. Choode chip
3. Choose chip number
4. Press * to select all banks
5. Press ID to check connection between chip and adapter
6. Press Read to start read process

To stop process disconnect USB cable
After successful read "FE" folder will be created in work folder. Chip.txt will be copied here. It contains chip paramaters


Writing
1. Choose work folder with dump files
2. Choose chip
3. Choose chip number
4. Press * to select all banks
5. Press ID to check connection between chip and adapter
6. Press Extra->Write to start write process

To stop process disconnect USB cable
Last added
SM3280P AB   45 3a 94 93   2x2 SM325QF   ad d5 55 a5   2x2 Monolith USB 51   45 3a 94 93   1x1 Monolith USB 50   45 4c 98 a3   1x1 6D0201F288C10   98 3c 95 93   4x4 Monolith SD Unknown   98 3c 95 93   1x4 SM3268P   2c a4 64 32   1x1 Monolith Micro SD SM3257   ec de 98 ce   1x4 Monolith USB SM3257   45 4c 98 a3   1x2 THGBMBG6D1KBAIL   98 de 94 93   1x1
News
01.12.2019 Power Adapter v3
20.04.2018 Sector Number Slow
17.03.2018 Adapter BGA-272
22.02.2018 Bad Bytes Editor
18.10.2017 Power adapter
Other products
Soft-Center ltd.