Flash Extractor
Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
Monolith varnish remove

Attention, dont use this method direcly on clients flash. First train on onther devices

1) Check USB stick for damaged tracks, fractures.



2) Use polishing paste (for polishing CD, DVD, mobile phone screens) and felt roller to remove varnish. The main tool is rotary.



3) The paste is applied evenly on the surface of the flash, start polish from the edge.



4) Do not let the roll work on "dry", the flash drive is strongly heated by friction, and press down firmly flash drive to the plane of the table - there is a danger to flash during the rotation of the roller to be carved from the desktop.



5) Control the roller pressing force, excessive force is a danger to erase the tracks.

Last added
SM3257EN   98 3a a8 92   1x1 Monolith SD_1   45 3e 97 83   1x1   v3 AU6989SNHL   2c 64 44 4b   1x1 Monolith MS_2   ec d7 94 72   1x1 TC58NC6626G6F   98 3a 98 a3   1x1 SM2704A AC   2c 84 64 54   1x4 Unknown 1098   89 84 64 3c   1x1 IS817   45 de 98 92   1x1 Monolith SD_1   45 3e 97 83   1x1   v2 20-82-00270-1   45 3e 97 83   4x1   v2
News
20.04.2018 Sector Number Slow
17.03.2018 Adapter BGA-272
22.02.2018 Bad Bytes Editor
18.10.2017 Power adapter
07.10.2016 Conatiner v9
Other products
Soft-Center ltd.