Flash Extractor
Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
External power v2
With this method you can give external power to reader
Reader will work from 2.5 to 3.3V
With less voltage it will not start

Attention:
1. Can not return reader to previous state with internal power
2. Can destroy reader



Make next steps to attach reader to computer:
1. Turn power off
2. Turn power on
3. Check current is about 0.07A
4. Attach USB cable
5. Check current is about 0.17A. If less reader do not work
Last added
SM2246XT H AA   98 de 94 83   1x4 AU6384   ec da 80 15   1x1 T01642C   98 3e 96 93   2x2 MS_11   ec d5 55 25   1x2 SM2246XT H AA   2c 84 c1 3c   4x4 Monolith USB_32   ec d7 98 ca   1x1   v2 PS3110-S10C-12   98 3a a8 92   8x2 PS3110-S10C-12   98 3a a8 92   8x1 IS817   45 d7 84 93   1x1 PS8035-0   2c 88 04 4b   2x1
News
07.10.2016 Conatiner v9
07.09.2016 VT / Auto - new mode
27.07.2016 CR2 files support
10.04.2016 Processor Cores
08.03.2016 Sandisk Rotate
Other products
Soft-Center ltd.