Flash Extractor
Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
Block Number
This assembler arranges the blocks in ascending order of block number

Actions

Properties
Edit properties

Scan
Scan dump


Listing
Show blocks in order of their position in dump

Translator
Show blocks in order of their position in image


Conflicts List
Show list of conflicts

Conflicts Auto
Try auto resolve conflicts
This method based on checking files


Find Bank Size
Find size of banks


Open Image
Open image

Save Image
Save image


Properties

Block Size*
Block Size

Bank Space
The size of area in the dump reserved for blocks of one bank

Image Offset
MBR offset in image

Banks
Number of blocks in each bank

Correction
Manual translator correction

Format:
block number in image / block address in dump

Example:
0x10 / 0x125000


Sector Updates / Size
Update size

Sector Updates / Enable
Enable updates


Mix
Adds Join by Page between neighboring blocks in the image

Format:
4 / 0x200
2 / 0x8000

Means:
Join by Page 4, 0x200
Join by Page 2, 0x8000

Scan Offset
During scan skip this number of sectors from start of block to get marker

Scan Back
During scan take marker from end of block

Scan MAX
Maximum number of sectors that can be checked during scan, if marker have error

*Make Scan after change of this properties
Last added
SM2246XT H AA   98 de a4 82   4x4 TC58NC6611G6F   98 de 98 92   1x1 PS3109-S9-J   98 3c 95 93   2x4   v2 PS3108-S8-I   98 de 94 93   4x4 PS3109-S9-J   2c 84 64 3c   4x2 SM2244LT   98 de 84 93   4x2 82-00515-5   45 4c a8 a2   1x2 TC58NC2307G6F   98 3a 98 a3   1x2 SM2703F AA   2c 84 64 54   1x1 PS3110-S10-X   98 3a 94 93   16x2
News
07.10.2016 Conatiner v9
07.09.2016 VT / Auto - new mode
27.07.2016 CR2 files support
10.04.2016 Processor Cores
08.03.2016 Sandisk Rotate
Other products
Soft-Center ltd.