Joined: 01 Dec 2009 Posts: 4560 Location: Soft-Center
Posted: Thu Feb 25, 2010 16:11 Post subject: Assembler Memory Stick Samsung
Memory Stick Samsung is Assembler for flash cards Memory Stick series with controller Samsung ARM inside.
No steps are needed to remove mix. Proceed with Assembler at once.
Properties: Body - settings of assembly of area with data
Page - size of page in bytes from cfg file. It is determined automatically.
Block - number of pages in block. It is 0x200 or 0x100 usually.
Max - maximum size of image. It is the size of whole dump in default mode. If you need to check the chosen properties for assembler you can use some part of dump and put value 0x2000000 in this field
Only adjustment of field Body is important for Raw recovery.
FAT - settings of assembly of area with FAT
Size - size of area with FAT
Mix - mix for area with FAT. It's highly recommended taking information from statistic.
In order to check proper value of Size user needs to assemble small part of dump and start Check_Dirs. If the value of Size have been set 0x38000 and Check_Dirs shows Diff+ 0x00020000 then the value of Size should be decreased with Diff value:
