| Author |
Message |
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
 Posted: Wed Apr 02, 2008 22:59 Post subject: What Cfg file to read out 8GFAA
|
|
Hi Sergei,
I got this strange chip in today, it's from a 1Gb Usb memory.
But what Cfg file should I use on this one?
I put some .jpg and chip.txt in the container.
Regards/ Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Apr 03, 2008 1:27 Post subject:
|
|
|
Show resuilt of Read_ID in 1,2,3,4 banks
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Thu Apr 03, 2008 16:33 Post subject:
|
|
Hi Sergei, I only got 0:s.
This is how you mean right...
Load any config file then ok, right-click then Read-ID.
When I've done that I only get 00 00 00 00 Error.
Do I do something wrong here?
Regards/ Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Apr 03, 2008 16:38 Post subject:
|
|
Try Read_ID with:
K9K4G08
K9K2G16
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Thu Apr 03, 2008 16:48 Post subject:
|
|
Now I've read those two and all 4 banks, still 0:s
Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Apr 03, 2008 17:28 Post subject:
|
|
Move your finger across pins (from down side).
They are charp or smooth?
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Thu Apr 03, 2008 18:00 Post subject:
|
|
|
Hi, one side was sharp the other was smooth....I shall see if I can cleen it up more.
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Thu Apr 03, 2008 21:41 Post subject:
|
|
Hi Sergei, I've now cleaned it up as much there is.
I did try to ID again, but still no luck.
Any other Cfg files I can try?
Regards/ Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Apr 03, 2008 22:14 Post subject:
|
|
| Bosse wrote: | | Any other Cfg files I can try? |
No
Rar in container is damaged.
Please, upload again.
And make photo of pcb under memory chip.
I want look on routing
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Thu Apr 03, 2008 22:33 Post subject:
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Apr 03, 2008 23:37 Post subject:
|
|
First pin near small circle (not big)
Do you put it to USB side of adapter?
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Fri Apr 04, 2008 11:21 Post subject:
|
|
Yes, small circle towards the usb contact.
There is also this number on the downside of the chip, 01960815011 don't know if it's relevant or not.
Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Fri Apr 04, 2008 11:37 Post subject:
|
|
PCB routing is same as other chips.
We don't have docs on it.
We don't have full functional analogs.
I can't help
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Fri Apr 04, 2008 12:00 Post subject:
|
|
Okey, I tell my client that I'll save it for the future.
Thanks a lot.
Regards/ Bosse
|
|
|
|
