| Author |
Message |
continuum
Joined: 14 Nov 2007
Posts: 57
|
 Posted: Wed Mar 26, 2008 9:18 Post subject: OTI controller 2169S
|
|
- Flash type USB
-Controller name OTI 2169s
- Flash chips amount 1
- Flash chip name K9K4G08U0M
- Config file content (Show config)
MNG = Samsung
ID = ec dc c1 15
Bits = 8
Page = 2112
Block = 0x21000
MB = 512
COL = 2
RAW = 3
READ = 30
SBACK = 0
RE_Down = 2
RE_Up = 1
SE_ = 0
- Dumps amount 1
- Do you found FAT? yes
- Is there mix? No
- Do you remove mix? N/A
Put piece of FAT on FTP -done - RS2154300K.RAR
Cannot find marker for this one.
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Wed Mar 26, 2008 10:03 Post subject:
|
|
|
Uploaded to container above.
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Wed Mar 26, 2008 15:53 Post subject:
|
|
Try
Block_Number / 0000
Sector 2048/64
Marker 2050/2051
Calculate Block_Size
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Thu Mar 27, 2008 9:52 Post subject:
|
|
Still no luck.
Tried 0x21000 bs and 0 x 840 (as there is a marker at 2053) but no luck
Any hints?
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Mar 27, 2008 12:35 Post subject:
|
|
Dump_Converter / Listing
Block_Size 0x4200
Sector 2048/64
Put log in container
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Fri Mar 28, 2008 3:40 Post subject:
|
|
Done thanks
MBR is at 0x73800 if this helps.
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Sun Mar 30, 2008 6:50 Post subject:
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Mon Mar 31, 2008 12:54 Post subject:
|
|
Put log of
Block_Number / 0000
Block_Size 0x21000
Sector 2048/64
Marker 2050/2051
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Tue Apr 01, 2008 8:57 Post subject:
|
|
Done.
Filter shows banks as
00 / 0x000 / 0x3df
01 / 0x000 / 0x3e7
02 / 0x000 / 0x3e7
03 / 0x000 / 0x3e4
BS 0x400
cut begins 0
full blocks - unchecked.
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Tue Apr 01, 2008 11:39 Post subject:
|
|
Then press "save"
And put log of saving.
And 300k of Disk.image
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Wed Apr 02, 2008 14:07 Post subject:
|
|
| Сергей wrote: | Then press "save"
And put log of saving.
And 300k of Disk.image |
Done and Done.
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Wed Apr 02, 2008 14:36 Post subject:
|
|
Find FAT boot sector in Disk.image
Copy his address to MBR
And set file system type to FAT16
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Thu Apr 03, 2008 2:59 Post subject:
|
|
|
That was the first thing I did, but the 2nd fat is not there, and the root directory is also not in its place. I will upload the full image if you like?
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Apr 03, 2008 11:02 Post subject:
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Wed Apr 09, 2008 8:09 Post subject:
|
|
|
|
