| Author |
Message |
continuum
Joined: 14 Nov 2007
Posts: 57
|
 Posted: Thu Dec 13, 2007 6:50 Post subject: TC58NVG2 with Trek controller
|
|
- Flash type - USB
- Controller name - Trek - TD2SMG9
- Flash chips amount -1
- Flash chip name- TC58NVG2
- Config file content (Show config)
MNG = Toshiba
ID = 98 dc 84 a5
Bits = 8
Page = 2112
Block = 0x0
MB = 512
COL = 2
RAW = 3
READ = 30
SBACK = 0
RE_Down = 4
RE_Up = 2
SE_ = 0
- Dumps amount -2
- Do you found FAT?yes
- Is there mix?yes
- Do you remove mix? yes. I split by block (840) and then joined the 2 dumps.
I cannot work out what the marker is, as it seems to change from one to the other.
Block size is 0x21000
dump to RS2040_300k.rar
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20282
Flash-Extractor developer
|
|
Posted: Thu Dec 13, 2007 12:19 Post subject:
|
|
return to starting dump
use Transcend_f0
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Mon Dec 17, 2007 3:23 Post subject:
|
|
Is there any english notes on this? even a text file I can use to translate the support notes?
What configuration should I be using for this one?
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20282
Flash-Extractor developer
|
|
Posted: Mon Dec 17, 2007 13:12 Post subject:
|
|
First you need find Block_Size
When banks is red Block_Size is wrong.
When banks is green Block_Size is correct.
|
|
|
continuum
Joined: 14 Nov 2007
Posts: 57
|
|
Posted: Wed Dec 19, 2007 8:27 Post subject:
|
|
|
|
