| Author |
Message |
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
 Posted: Fri Jul 28, 2023 16:48 Post subject: [+] microSD 0x32 2c c3 08 - no layout
|
|
- Flash type : microSD
- Brand : Goodram
- Totall size: 64Gb
- ID: 32 2c c3 08 (Real: 2c c3 08 32)
- Banks: 1
- Page: 18592
- Sector: 32_1150
NOTES 4282:
1) Need create new layout for ECC with new bit rotation. This will be similar as SM 32_1144 layout where this rotation is available because SA ECC is green for our 32_1150. I add to container ECC polynom parametrs for this as well as sample blocks for ECC test
Chip config is similar as here:
http://www.flash-extractor.com/library/Monolith/USB/Part%205/Monolith%20USB_118__32_2c_c3_08__1x1 or http://www.flash-extractor.com/forum/viewtopic.php?t=12948
Block 0x3d47000
Blocks 0x548
Cmd Std
DDR true
Skip_Mask_1 0xfff
Skip_Page_1 0xd80
This chip is very hard to read, dump was read other reader with voltage modification: LOW 0,8V VCC 3.0V VCCQ 2.5V
# 28.07.2023 - Dump uploading
|
|
|
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
|
Posted: Sat Jul 29, 2023 0:27 Post subject:
|
|
|
GreyDKang
Joined: 01 Apr 2010
Posts: 111
Location: Vladivostok
|
|
Posted: Sun Jul 30, 2023 7:49 Post subject:
|
|
|
Hello, did you try read 2CC30832 EA chips? if I read ###32 C6 I can read with set VCC and VCCQ and never can read EA. It return always FF pages or one constant byte pages.
|
|
|
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
|
Posted: Mon Jul 31, 2023 13:30 Post subject:
|
|
|
Chip you ask use 6byte addressing - not possible to read correctly without change in NR soft
|
|
|
GreyDKang
Joined: 01 Apr 2010
Posts: 111
Location: Vladivostok
|
|
Posted: Wed Aug 02, 2023 12:05 Post subject:
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Aug 03, 2023 4:46 Post subject:
|
|
I'm sorry
I can not work on this case
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Aug 03, 2023 13:00 Post subject:
|
|
|
layout for ECC "SM 32_1150" added to FE_1194
|
|
|
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
|
Posted: Thu Aug 03, 2023 18:43 Post subject:
|
|
|
Dump readed with NR uploaded to container
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Fri Aug 04, 2023 7:48 Post subject:
|
|
|
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
|
Posted: Wed Aug 09, 2023 20:32 Post subject:
|
|
|
09.08.2023 - 77 upload started
|
|
|
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
|
Posted: Wed Aug 09, 2023 21:31 Post subject:
|
|
|
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
|
Posted: Fri Aug 11, 2023 15:48 Post subject:
|
|
|
11.08.2023 - LBA uploading
|
|
|
Bolo
Joined: 05 Dec 2017
Posts: 727
Location: 506F6C616E64
|
|
Posted: Fri Aug 11, 2023 20:35 Post subject:
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Sat Aug 12, 2023 4:17 Post subject:
|
|
Model "Monolith Micro SD_75" added to FE_1195
Raw Recovery test: 65 good, 844 broken jpegs
Work on ECC map, and result will be better
ECC Fix
ECC = Check
Scan
ECC = Off
Save Image
Make Raw Recovery or scan with r-studio
|
|
|
|
