Simple question, how do I determine the Sector Size value under properties?
Increments as follows:
Address: 0x13cb38000 - Sector: 0x22c6400
Address: 0x13cb40000 - Sector: 0x22c6800
Is Sector Size:
0x13cb38000 - 0x13cb40000 = 0x8000
0x22c6400 - 0x22c6800 = 0x400
I keep running into SanDisk images with plenty of data (80% or more full) using Sector Number Slow and the resulting image file has almost no data yet the sector numbers are well within the GB bounds limit.