Flash Extractor
© Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
multiple ECC combine element   Search  Register  Log in
Many support requests at same time. Can be delay with answers
Reply to topic Goto page Previous  1, 2, 3, 4  Next
Author Message
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Fri Jun 04, 2021 12:16    Post subject:
Reply with quote

Do you sure that it hangs?

If select, for exmaple, 6 cores, FE need some time for initialization

May be need wait 5 mins?
Arthur



Joined: 17 Oct 2007
Posts: 327


PostPosted: Mon Jun 07, 2021 16:27    Post subject:
Reply with quote

Сергей wrote:
Do you sure that it hangs?

If select, for exmaple, 6 cores, FE need some time for initialization

May be need wait 5 mins?

Yes I'm sure it hangs. Even with several hours wait. Only way is to reboot the computer.
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Mon Jun 07, 2021 17:01    Post subject:
Reply with quote

Okey

Waiting when i make new driver

Then check again
pcimage



Joined: 03 Mar 2008
Posts: 1702
Location: UK

PostPosted: Tue Jun 15, 2021 10:23    Post subject:
Reply with quote

Can we get new (fixed) driver for W10 64-Bit?
Arthur



Joined: 17 Oct 2007
Posts: 327


PostPosted: Tue Jun 15, 2021 11:28    Post subject:
Reply with quote

pcimage wrote:
Can we get new (fixed) driver for W10 64-Bit?

Сергей, I forgot to mention that the driver I am using is the 64-bit version. I have not tested the 32-bit version.
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Tue Jun 15, 2021 20:36    Post subject:
Reply with quote

I fix error in driver
Jeremt test it and tell that ECC Reread do not hangs

But driver is not signed
You can use it but need start Windows in special mode. After each reboot need press F8 and select option "disable driver sign check"

I think i can make normal signed driver only after ~1-2 monthes
Mark



Joined: 30 Mar 2010
Posts: 42


PostPosted: Wed Jun 16, 2021 4:28    Post subject:
Reply with quote

Can we get a copy of the unsigned driver, please.
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Wed Jun 16, 2021 8:57    Post subject:
Reply with quote

1. Set Windows in test mode
2. F8 during boot -> Disable driver signing check

Please, tell about results

Test_Driver_x64.rar
 Description:

Download
 Filename:  Test_Driver_x64.rar
 Filesize:  4.41 KB
 Downloaded:  23 Time(s)

Arthur



Joined: 17 Oct 2007
Posts: 327


PostPosted: Wed Jun 16, 2021 15:08    Post subject:
Reply with quote

Stilll not work. But no longer need to reboot the PC after disconnecting the reader.

-----------
ECC Reread
-----------
01_01
Fix Main On
Max Diff 10%
Attempt 1

ID ad 3a 18 03

After 30 minutes, I disconnect the reader and get this:

Canceled.
Media Error: Read failure, pos 0x00000000, size 0x481000
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Thu Jun 17, 2021 21:33    Post subject:
Reply with quote

Arthur wrote:
Stilll not work. But no longer need to reboot the PC after disconnecting the reader.

This is good
Now we can debug FE

Please, copy dump to separate folder (that we do not damaged good dump)

Set in FE / Chip.txt
Power = Empty

Open FE again

Try FE Reread

Power adapter disconnected?
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Sun Jun 20, 2021 15:06    Post subject:
Reply with quote

Or try with not TSOP-48 case

And without power adapter

-----

I can not repeat this bug at my Win7 computer

I think may be win10 do something different then Win7
Arthur



Joined: 17 Oct 2007
Posts: 327


PostPosted: Mon Jun 21, 2021 15:53    Post subject:
Reply with quote

- No power adapter
- Power = Empty (in Chip.txt)

I get this error immediate without power off reader:
-----------
ECC Reread
-----------
01_01
Fix Main On
Max Diff 10%
Attempt 1

ID ad 3a 18 03
Canceled.
Media Error: Read failure, pos 0x00000000, size 0x481000


And if i try 2:nd time, without disconnecting reader:
-----------
ECC Reread
-----------
01_01
Fix Main On
Max Diff 10%
Attempt 1

Canceled.
Media Error: Write failure - A device attached to the system is not functioning.

It hangs on 2:nd try, but the above when disconnecting the reader.
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Thu Jun 24, 2021 15:15    Post subject:
Reply with quote

Arthur, please, run FE Reread with this test version
http://78.108.192.241/download/Flash_Extractor_temp_v38.rar

I think it will hangs

But i need log
Arthur



Joined: 17 Oct 2007
Posts: 327


PostPosted: Wed Jun 30, 2021 21:59    Post subject:
Reply with quote

Сергей wrote:
Arthur, please, run FE Reread with this test version
http://78.108.192.241/download/Flash_Extractor_temp_v38.rar

I think it will hangs

But i need log

Still got this:
-----------
ECC Reread
-----------
01_01
Fix Main On
Max Diff 10%
Attempt 1

ID ad 3a 18 03
Pos 0x0
Read 0x481000
Canceled.
Media Error: Read failure, pos 0x00000000, size 0x481000

Need to power off/on reader in order to get ID again.

"Test retry" and "constant read" works fine. What is the difference when reading chip for ReRead?

I will try another chip to see if there is any difference.
Сергей



Joined: 26 Aug 2005
Posts: 18728

Flash-Extractor developer

PostPosted: Thu Jul 01, 2021 13:04    Post subject:
Reply with quote

Signed driver for Win10
http://www.flash-extractor.com/downloads/Driver/Driver_Win10_v6.rar

For Win7 will be later

It solve random blue screen problems during connect / disconnect

It do not solve ECC_Reread hangs
But when you disconnect reader, not need to reboot computer
Disconnect / Connect will restore reader functions
Display posts from previous:   
Reply to topic All times are GMT + 4 Hours
Goto page Previous  1, 2, 3, 4  Next
Page 3 of 4

 

Last added
SM2236G-AC   98 de 94 93   4x4 PS2251-08-Q   98 3c 95 93   1x4 Monolith USB_87   ec 3a 94 43   1x1 Monolith USB_86   ad 3a 18 a3   1x1 PS3106-P9-R   2c 88 04 4b   4x1 PS2251-08-Q   98 3a 95 93   2x4 CBM2098E   2c 68 04 4a   1x1 20-82-00549   45 3a 94 93   2x2 SM3267L-AE   45 3c 98 b3   1x1   v2 IS903   89 84 64 3c   2x4   v3
News
15.07.2021 New drivers
21.05.2021 BGA-152 18x12 (smaller)
09.05.2021 Make FAT32 Root
20.01.2021 VT can work with NTFS
29.11.2020 Find Saddle
Other products
© Soft-Center ltd.