Flash Extractor
© Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
Adding feature from NR into FE   Search  Register  Log in
Reply to topic
Author Message
Bolo



Joined: 05 Dec 2017
Posts: 361
Location: 506F6C616E64

PostPosted: Thu Feb 13, 2020 16:50    Post subject: Adding feature from NR into FE
Reply with quote

Hello,

I ask you to add a option into Test Retry and Test Voltage in FE as it is now in NR - let's call it "Custom" so into Fe Test Voltage and Test Retry add:

- Before Read
- After Read

Those Debug functions (Before Read and After Read) already exist into NAND REader so it schouldn't be a problem to add this feature into leatest FE software as "Custom"

Please let me know if this is possible since it can help a lot with checking own RR modes which we can get from registry together with ECC layout in FE and diffrent voltages using V3 adapter.

Right now checking this is bit complicated.... we need to use NAND console with correct commands and address and then import into FE, choose layout etc.... by adding this function checking new RR modes can be done much much quicker and new commands for modern chips can be send to you to add into FE.

Can you add this ?
custom_rr_voltage_fe.jpg
Custom_RR_FE.jpg
jeremyb



Joined: 09 Dec 2008
Posts: 1587
Location: RecoverMyFlashDrive.com Bridgeport, CT, USA

PostPosted: Thu Feb 13, 2020 20:07    Post subject:
Reply with quote

I don't understand the suggestion, do you mean:
Allow NR to voltage step through Debug (Before Reset / Before Read) commands?

I just implemented this feature in my code, we can see if this makes any difference tomorrow when we troubleshoot
Bolo



Joined: 05 Dec 2017
Posts: 361
Location: 506F6C616E64

PostPosted: Thu Feb 13, 2020 22:11    Post subject:
Reply with quote

NAND Reader got this function already - I want to add this into Flash Extractor interface too

What it gives:
Run own custom RR command for debug/development for new memory chips together with ECC check from layout - so before Read will work as a custom RR and Flash Extractor can use other its features like check voltages along with own RR. This are must in case of layout with doesnt allows ECC backwrite so save need to be done with ECC ON

Without this findingcorrect new registry (modes and values) for RR takes a lot of time manually...
1.jpg
arvika



Joined: 18 Nov 2009
Posts: 1815
Location: Poland

PostPosted: Thu Feb 13, 2020 22:27    Post subject:
Reply with quote

It could be good idea to implement if it help. Currently there is a big problem with reading chips with good quality dump.
Сергей



Joined: 26 Aug 2005
Posts: 18069

Flash-Extractor developer

PostPosted: Sat Feb 15, 2020 17:31    Post subject:
Reply with quote

Added to FE_886
Display posts from previous:   
Reply to topic All times are GMT + 4 Hours
Page 1 of 1

 

Last added
Monolith Micro SD_18   ec 3a 98 bf   1x2 SSS6696   98 d7 94 32   1x1 UP309   45 3c 98 b3   1x1 EN3257LT Q AB   2c 84 64 54   1x1   v2 PS2251-08-Q   98 de 94 93   2x4 SM3257EN Q AA   45 d7 98 b2   1x1 IS916EN   98 d7 98 92   1x1 SM321QF CC   2c d7 d5 3e   1x2 SSS6137   45 3e 98 b3   1x1 IT1178D   98 d7 94 32   1x1
News
21.07.2020 RR manual updated
10.07.2020 Power adapter in stock
05.05.2020 RR even and odd blocks
10.03.2020 RR for ad 3a 18 03
01.12.2019 Power Adapter v3
Other products
© Soft-Center ltd.