Flash Extractor
© Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
SanDisk cruzer titanium 2GB   Search  Register  Log in
23.09.2023 - tech support stopped
23.09.2024 - forum closed
This topic is locked: you cannot edit posts or make replies.
Author Message
Robi



Joined: 19 Oct 2007
Posts: 308
Location: Ljubljana, Slovenia

PostPosted: Thu Jan 31, 2008 15:13    Post subject: SanDisk cruzer titanium 2GB
Reply with quote

- Flash type USB
- Controller name: SanDisk 20-99-00121-1
- Flash chips amount: 1
- Flash chip name: SDTNKLBHSM-2048
- Config file content (Show config):

MNG SunDisk
ID 0x45 0xcc 0x94 0x65
Bits 16
Page 2112
MB 256
COL 2
RAW 3
READ 0x30
SBACK 0x00
End

I modified the reader, I get the dump but it is only 276.824.064 bytes.

I cannot find FAT
Сергей



Joined: 26 Aug 2005
Posts: 20282

Flash-Extractor developer

PostPosted: Thu Jan 31, 2008 15:31    Post subject:
Reply with quote

To find FAT use
Dump_Converter / Swap (1)
Robi



Joined: 19 Oct 2007
Posts: 308
Location: Ljubljana, Slovenia

PostPosted: Fri Feb 01, 2008 11:21    Post subject:
Reply with quote

I can't find FAT

It is very strange... Flash drive is 2GB but dump is only 200 and some kbytes
Сергей



Joined: 26 Aug 2005
Posts: 20282

Flash-Extractor developer

PostPosted: Fri Feb 01, 2008 12:12    Post subject:
Reply with quote

Because MB = 256

Flash chip name = SDTNKLBHSM-2048
2048 Mbit = 256 MByte
Robi



Joined: 19 Oct 2007
Posts: 308
Location: Ljubljana, Slovenia

PostPosted: Fri Feb 01, 2008 12:17    Post subject:
Reply with quote

There is only 1 chip and the SanDIsk flash is definately 2 GB so I don't think it is only 256MB on that chip

So here something is wrong

Now I used this config:

MNG SunDisk
ID 0x45 0xb5 0x95 0xe5
Bits 16
Page 2112
MB 2048
COL 2
RAW 3
READ 0x30
SBACK 0x00
End

and I get 2 GB dump and after swap(1) I can even find some FAT12 FAT16 and FAT32 entries if I look for FAT??
Сергей



Joined: 26 Aug 2005
Posts: 20282

Flash-Extractor developer

PostPosted: Tue Feb 05, 2008 0:48    Post subject:
Reply with quote

We have only half of data.

Try page = 4224.

Your reader is USB 2.0 ?
Robi



Joined: 19 Oct 2007
Posts: 308
Location: Ljubljana, Slovenia

PostPosted: Tue Feb 05, 2008 12:37    Post subject:
Reply with quote

Yes, reader is USB 2.0

OK I will try page 4224 and I will put another dump on ftp

The first dump I sent you was read with this cfg:
MNG SunDisk
ID 0x45 0xb5 0x95 0xe5
Bits 16
Page 2112
MB 2048
COL 2
RAW 3
READ 0x30
SBACK 0x00
End
Сергей



Joined: 26 Aug 2005
Posts: 20282

Flash-Extractor developer

PostPosted: Wed Feb 06, 2008 22:36    Post subject:
Reply with quote

I need research work from you

Set MB = 8192, page 2112

You get 8GB dump
Then "split by dump" on 8 parts.

Exemine them.
Look for:
- empty / zero / FFFF dumps
- repeated dumps
Robi



Joined: 19 Oct 2007
Posts: 308
Location: Ljubljana, Slovenia

PostPosted: Mon Feb 11, 2008 12:56    Post subject:
Reply with quote

OK...

I get 8 split files and after checking and compareing i get

split0 - split4 = 326 diffrences
split1 - split5 = no differences
split2 - split6 = 262 differences
split3 - split7 = 1 difference

split0 - split1 = different
split2 - split3 = different
split0 - split2 = different
Сергей



Joined: 26 Aug 2005
Posts: 20282

Flash-Extractor developer

PostPosted: Mon Feb 11, 2008 17:49    Post subject:
Reply with quote

Image.rar on ftp
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies. All times are GMT + 4 Hours
Page 1 of 1

 

Last added
AU6989NHL-2   98 d7 98 b2   1x1 SM3281L-AB   45 3c 98 b3   1x1   v5 Monolith Micro SD_76   98 3c 99 a3   1x4 SM3265P-AC   45 3e 98 03   1x1 SM3281N-AB   45 48 9a b3   2x2 Monolith Micro SD_75   32 2c c3 08   1x1 Monolith Micro SD_74   45 3e 98 b3   1x4   Ref AU6989SNHL-2   45 de 98 92   1x1 SM3261L-AB   45 de 98 92   1x1 SM2232T AC   89 d7 94 3e   4x2
News
01.02.2024 Save FE key
23.09.2022 The End
11.11.2021 Legs for NR
16.08.2021 Sector Number Slow
15.07.2021 New drivers
© Soft-Center ltd.