Flash Extractor
© Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
Which cfg to use for hy27ug084g2m?   Search  Register  Log in
23.09.2023 - tech support stopped
This topic is locked: you cannot edit posts or make replies.
Author Message
hd07



Joined: 13 Dec 2007
Posts: 263


PostPosted: Fri Dec 14, 2007 23:35    Post subject: Which cfg to use for hy27ug084g2m?
Reply with quote

Which cfg to use for hy27ug084g2m?
I tried a few and it does not read. "data corrupt: wrong ID".
hy27ut084g2
hy27ug088g2
Thanks.
phil
Laughing
Сергей



Joined: 26 Aug 2005
Posts: 20282

Flash-Extractor developer

PostPosted: Sat Dec 15, 2007 2:15    Post subject:
Reply with quote

if ID is adequate
(not ff ff ff ff or 00 00 00 00)
Set Check_ID = false
and read

http://www.soft-center.ru/files/cfg/NAND/HY27UT084G2.cfg

main letters is 084G2:
4G = 4Gbit = 512MB
08 = data bus width
G2 = 1 bank
G5 = 2 bank
hd07



Joined: 13 Dec 2007
Posts: 263


PostPosted: Mon Dec 17, 2007 3:13    Post subject:
Reply with quote

Сергей wrote:

Set Check_ID = false
and read

Thanks, it read OK.
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies. All times are GMT + 4 Hours
Page 1 of 1

 

Last added
AU6989NHL-2   98 d7 98 b2   1x1 SM3281L-AB   45 3c 98 b3   1x1   v5 Monolith Micro SD_76   98 3c 99 a3   1x4 SM3265P-AC   45 3e 98 03   1x1 SM3281N-AB   45 48 9a b3   2x2 Monolith Micro SD_75   32 2c c3 08   1x1 Monolith Micro SD_74   45 3e 98 b3   1x4   Ref AU6989SNHL-2   45 de 98 92   1x1 SM3261L-AB   45 de 98 92   1x1 SM2232T AC   89 d7 94 3e   4x2
News
01.02.2024 Save FE key
23.09.2022 The End
11.11.2021 Legs for NR
16.08.2021 Sector Number Slow
15.07.2021 New drivers
Other products
© Soft-Center ltd.